SPT WA-10FMS1 User Manual Download

Page: 1 / 18

WINDOW AIR CONDITIONER

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WINDOW/WALL TYPE

MULTI-STEP SPEED ELECTRONIC CONTROL

T A B L E O F C O N T E N T S

Installation Instructions

.................................................9

4-8

Normal Sounds

....................................

Important Safety Instructions ..........................1-3

Air Conditioner Features 10-11

..............................

Care and Cleaning ......................................11-12

Remote Control .....

12-15

.....................................

Troubleshooting Tip

. 1

. 6

Before using your air conditioner, please read
this manual carefully and keep it for future reference.

WA-60FMS1: 6,000 BTU
WA-80FMS1: 8,000 BTU
WA-10FMS1: 10,000 BTU
WA-12FMS1: 12,000 BTU

Summary of Contents for WA-10FMS1



















Search results

Summary of Contents for WA-10FMS1

Reviews:

Related manuals for WA-10FMS1

Brands by name

Popular brands

SPT WA-10FMS1, User Manual

Search results

Summary of Contents for WA-10FMS1

Reviews:

Related manuals for WA-10FMS1

Brands by name

Popular brands