![background image](http://html.mh-extra.com/html/daikin/2amx40g2v1b/2amx40g2v1b_service-manual_501057116.webp)
Instruction
SiBE12-933_A
106
Operation Manual
To start 3-D Airflow
1. 3. Press the “SWING button
” and the “SWING button
”:
the “
” and “
” display will light up and the flap and louvers will
move in turn.
To cancel 3-D Airflow
2. 4. Press either the “SWING button
” or the “SWING button
”.
Notes on flaps and louvers angles
• When “
SWING button
” is selected, the flaps
swinging range depends on the operation
mode. (See the figure.)
Three-Dimensional (3-D) Airflow
• Using three-dimensional airflow circulates cold
air, which tends to collected at the bottom of
the room, and hot air, which tends to collect
near the ceiling, throughout the room,
preventing areas of cold and hot developing.
ATTENTION
• Always use a remote controller to adjust the
angles of the flaps and louvers. If you attempt
to move it forcibly with hand when it is
swinging, the mechanism may be broken.
• Always use a remote controller to adjust the
louvers angles. In side the air outlet, a fan is
rotating at a high speed.
In DRY mode or
COOL mode
COMFORT AIRFLOW
Upper limit
Stop operation
Lower limit
5°
15°
50°
In HEAT mode
Upper limit
COMFORT AIRFLOW
Lower limit
30°
70°
Stop operation
80°
In FAN mode
Upper limit
Lower limit
5°
80°
Stop operation