![background image](http://html.mh-extra.com/html/daikin/2amx40g2v1b/2amx40g2v1b_service-manual_501057163.webp)
SiBE12-933_A
Instruction
Operation Manual
153
1. WHAT TO DO BEFORE
OPERATION
• Heat pump type
This system provides cooling, heating,
automatic, program dry, and fan operation
modes.
• Cooling only type
This system provides cooling, program dry,
and fan operation modes.
PRECAUTIONS FOR GROUP CONTROL
SYSTEM OR TWO REMOTE
CONTROLLER CONTROL SYSTEM
This system provides two other control systems
beside individual control (one remote controller
controls one indoor unit) system. Confirm the
following if your unit is of the following control
system type.
•
Group control system
One remote controller controls up to 16 indoor
units.
All indoor units are equally set.
•
Two remote controllers control system
Two remote controllers control one indoor unit
(In case of group control system, one group of
indoor units)
The unit is individually operated.
NOTE
• Contact your Daikin dealer in case of changing
the combination or setting of group control and
two remote controllers control system.
Names and functions of parts
Refer to figure 2 on page [1]
This operation manual is for the following systems
with standard control. Before initiating operation,
contact your Daikin dealer for the operation that
corresponds to your sysem.
• Pair system
• Multi system
NOTE
• If the unit you purchased is controlled by a
wireless remote controller, also refer to the
wireless remote controller
’
s operation manual.
If your installation has a customized control
system, ask your Daikin dealer for operation that
corresponds to your system.
a
Indoor unit
b
Outdoor unit
• The external appearance of the outdoor
unit varies depending on its capacity class.
The outdoor unit shown in the figure is for
reference to indicate features. Contact
your Daikin Dealer and verify which
outdoor unit you have.
c
Remote controller
d
Inlet air
e
Discharged air
f
Air outlet
g
Air flow flap (at air outlet)
h
Refrigerant piping, connection electric wire
i
Drain pipe
j
Air inlet
The built-in air filter removes dust and dirt.
k
Drain pumping out device (built-in)
Drains water removed from the room during
cooling.
l
Ground wire
Wire to ground from the outdoor unit to
prevent electrical shocks.
Indoor unit
Unit with
remote
controller
Outdoor unit
Indoor unit
Outdoor unit
Unit with
remote
controller
Indoor unit
Unit with
remote
controller