D-Link DKVM-IP1 User Manual Download Page 94 | Manualshive

Page: 94 / 134

background image

4.5.3

Security

Above: The “Device Settings > Security” setup screen.

The

Device Settings > Security

panel (see the screenshot above) allows the user to

change security-related parameters. Each parameter will be explained below. After changing
any settings, click the

Apply

button to save your changes.

Force HTTPS for Web access

If this option is enabled, access to the web GUI is only possible using an HTTPS

connection. The DKVM-IP1 will not listen on the HTTP port for incoming

connections.

KVM encryption

This option controls the encryption of the RFB protocol. RFB is used by the Host
Console to transmit screen data from the Host computer to the Remote computer, and
keyboard and mouse data from the Remote computer back to the Host. If this options is
set to “Off”, no encryption will be used. If set to “Try” the applet will try to make an
encrypted connection. In case the encrypted connection fails for any reason, an
unencrypted connection will be used.

93

«
...
92
93
94
95
96
...
»

Summary of Contents for DKVM-IP1







































































































































Reviews:

No comments

Related manuals for DKVM-IP1

Brand: Acnodes Pages: 1

Brand: Austin Hughes Pages: 20

Brand: I-Tech Pages: 12

Brand: Bosch Pages: 8

Brand: CyberView Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands