2 Configuration
2.1 Initial Network Configuration with the setup software
After the initial setup, the DKVM-IP1 can be managed via a web management program
(GUI) that lets you control the device/s attached to it. However, to configure the
DKVM-IP1’s network access, the user must first run the DKVM-IP1 Utility software that is
included on the CD-ROM included in your package (DKVM-IP1_Utility.exe).
The DKVM-IP1 Utility lets you set up the DKVM-IP1’s network configuration (IP address,
Subnet mask, DHCP, etc) from any computer that is connected to the same subnet. This
program is also useful if you ever need to view or change the network settings of the unit.
If the initial or default basic configuration does not meet your requirements, use the
DKVM-IP1_Utility.exe program to change the configuration to suit your needs.
To open the DKVM-IP1 Utility on your computer
, simply insert the CD-ROM and
double-click on the DKVM-IP1_Utility.exe icon when the CD-ROM’s content window
appears. The DKVM-IP1 Utility window (see the screenshot below) will appear.
Above: The network setup screen of the DKVM-IP1 Utility program.
To use the DKVM-IP1 Utility, please follow the procedures described below.
Finding the DKVM-IP1 on your network via the DKVM-IP1 Utility:
1) Make sure the computer you are using to set up the DKVM-IP1 is connected to the
same local network that the DKVM-IP1 is connected to.
15
