manualshive.com logo in svg

D-Link DKVM-IP1, User Manual, Page: 68 / 134

Share
Download
D-Link DKVM-IP1 User Manual Download Page 68

3.  Choose an appropriate name for the share. You may also add a short description for this folder 

in the 

Comment

 field).   

4.  Add the users that will be allowed to access the file in the “Permissions” screen. 

5. Click 

Apply

 and 

OK

 to save the settings. 

6.  Copy the CD/DVD ISO image file to this sharing folder. 

 
For additional help in creating and sharing an ISO image, please contact your network 
administrator. 

 

Above: To create a sharing folder and set up the usage permission levels of each user, right-click 

on the folder and follow this sequence: Sharing and Security > Sharing > Share this folder > 

Permissions.  

 

UNIX and UNIX-like OS (UNIX, Solaris, Linux)   

If you would like to access the share folder via SAMBA, SAMBA must be set up properly. 
You may either edit the 

/etc/samba/smb.conf

 SAMBA configuration file or use the 

Samba Web Administration Tool (SWAT) or WebMin to set the correct parameters. 
Viewing the 

man 

entry for 

smb.conf

 may also provide additional help. 

67

 

Summary of Contents for DKVM-IP1







































































































































Reviews:

No comments