DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 498
DHCP
S
ERVER
C
OMMANDS
Back to Section Header
The DHCP Server commands in the Command Line Interface (CLI) are listed (along with the appropriate
parameters) in the following table.
C
OMMAND
P
ARAMETERS
create dhcp excluded_address
begin_address
<ipaddr> end_address <ipaddr>
delete dhcp excluded_address
[begin_address <ipaddr> end_address <ipaddr> | all]
show dhcp excluded_address
create dhcp pool
<pool_name 12>
delete dhcp pool
[<pool_name 12> | all]
config dhcp pool network_addr
<pool_name 12> <network_address>
config dhcp pool
domain_name
<pool_name 12> {<domain_name 64>}
config dhcp pool dns_server
<pool_name 12> {<ipaddr>} {<ipaddr>} {<ipaddr>}
config dhcp pool
netbios_name_server
<pool_name 12> {<ipaddr>} {<ipaddr>} {<ipaddr>}
config dhcp pool
netbios_node_type
<pool_name 12> [broadcast | peer_to_peer | mixed |hybrid]
config dhcp pool
default_router
<pool_name 12> {<ipaddr>} {<ipaddr>} {<ipaddr>}
config dhcp pool lease
<pool_name 12> [<day 0-365> <hour 0-23> <minute 0-59> | infinite]
config dhcp pool boot_file
<pool_name 12> {<file_name 64>}
config dhcp pool next_server
<pool_name 12> {<ipaddr>}
config dhcp ping_packets
<number 0-10>
config dhcp ping_timeout
<millisecond 10-2000>
create dhcp pool
manual_binding
<pool name 12> <ipaddr> hardware_address <macaddr> {type [Ethernet
| IEEE802]}
delete dhcp pool
manual_binding
<pool_name 12> [<ipaddr> | all]
clear dhcp binding
[<pool_name 12> [<ipaddr> | all] | all]
show dhcp binding
{<pool_name 12>}
show dhcp pool
{<pool_name 12>}
show dhcp pool
manual_binding
{<pool_name 12>}
enable dhcp_server
disable dhcp_server
show dhcp_server
clear dhcp conflict_ip
[<ipaddr> | all]
show dhcp conflict_ip
{<ipaddr>}
Each command is listed, in detail, in the following sections.
