DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 478
config wac user
Description
This command is used to change the VLAN associated with a user.
Parameters
<username 15>
- Specify the name of user account which will change its VID.
vlan
- Specify the authentication VLAN name.
vlanid
- Specify the authentication VLAN ID.
clear_vlan
- Choose to clear the specified VLAN.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure the user’s VLAN:
DGS-3700-12:5#config wac user vlanid 100
Command: config wac user vlanid 100
Success.
DGS-3700-12:5#
show wac
Purpose
To display the WAC global setting.
Syntax
show wac
Description
This command is used to display the WAC global setting.
Parameters
None.
Restrictions
None.
Example usage:
To show WAC:
DGS-3700-12:5#show wac
Command: show wac
Web-Base Access Control
---------------------------------
State : Disabled
Method : Local
Redirect Path :
Virtual IP : 0.0.0.0
Switch HTTP Port : 80 (HTTP)
RADIUS Authorization : Enabled
Local Authorization : Enabled
DGS-3700-12:5#
show wac ports
Purpose
To display WAC port information.
Syntax
show wac ports {<portlist>}
Description
This command is used to display WAC port information.
Parameters
<portlist>
- Specify a range of member ports to display the status.
Restrictions
None.
Example usage:
To display WAC ports 1 to 3:
