D-Link DGS-3700 Series, Reference Manual

Page: 412 / 557

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 412
config authen_enable
RADIUS protocol from the remote RADIUS server hosts of the RADIUS server
group list.
server_group <string 15>
−
Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on the
Switch.
local_enable
−
Adding this parameter will require the user to be authenticated using
the local user account database on the Switch.
none – Adding this parameter will require no authentication to access the Switch.
method_list_name – Enter a previously implemented method list name defined by the
user ( create authen_enable ). The user may add one, or a combination of up to
four (4) of the following authentication methods to this method list:
tacacs – Adding this parameter will require the user to be authenticated using the
TACACS protocol from a remote TACACS server.
xtacacs – Adding this parameter will require the user to be authenticated using the
XTACACS protocol from a remote XTACACS server.
– Adding this parameter will require the user to be authenticated using the
protocol from a remote server.
radius
−
Adding this parameter will require the user to be authenticated using the
RADIUS protocol from a remote RADIUS server.
server_group <string 15>
−
Adding this parameter will require the user to be
authenticated using a user-defined server group previously configured on the
Switch.
local_enable
−
Adding this parameter will require the user to be authenticated using
the local user account database on the Switch. The local enable password of the
device can be configured using the “ config admin local_enable ” command.
none – Adding this parameter will require no authentication to access the
administration level privileges on the Switch.
Restrictions Only Administrator-level users can issue this command.
Example usage:
To configure the user defined method list “Permit” with authentication methods TACACS,
XTACACS and local, in that order.
DGS-3700-12:5#config authen_enable method_list_name Trinity method tacacs xtacacs local
Command: config authen_enable method_list_name Trinity method tacacs xtacacs local
Success.
DGS-3700-12:5#
Example usage:
To configure the default method list with authentication methods XTACACS, and local,
in that order:
DGS-3700-12:5#config authen_enable default method xtacacs local
Command: config authen_enable default method xtacacs local
Success.
DGS-3700-12:5#