DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 348
DGS-3700-12:5#show scheduling 1,2,3
Command: show scheduling 1-3
QOS Output Scheduling On Port: 1
Class ID Weight
-------- ------
Class-0 1
Class-1 2
Class-2 3
Class-3 4
Class-4 5
Class-5 6
Class-6 7
Class-7 8
QOS Output Scheduling On Port: 2
Class ID Weight
-------- ------
Class-0 1
Class-1 2
Class-2 3
Class-3 4
CTRL+C
ESC
q
Quit
SPACE
n
Next Page
ENTER
Next Entry
a
All
show scheduling_mechanism
Purpose
Used to show the traffic scheduling mechanism.
Syntax
show scheduling_mechanism {<portlist>}
Description
This command is used to display the current traffic scheduling mechanism in use on
the Switch.
Parameters
<portlist>
– Specifies a range of ports to be displayed.
Restrictions
None.
Example usage:
To display the scheduling mechanism:
DGS-3700-12:5#show scheduling_mechanism 1-4
Command: show scheduling_mechanism 1-4
Port Mode
----- ------
1 Strict
2 Strict
3 Strict
4 Strict
DGS-3700-12:5#
config 802.1p user_priority
Purpose
Used to map the 802.1p user priority of an incoming packet to one of the eight
hardware queues available on the Switch.
Syntax
config 802.1p user_priority {ports [<portlist> | all ]} <priority 0-7> <class_id 0-
n>
Description
This command allows users to configure the way the Switch will map an incoming
packet, based on its 802.1p user priority, to one of the eight available hardware
