D-Link DGS-3700 Series Reference Manual Download Page 296

Page: 296 / 557

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide

Page | 296

delete subnet_vlan

Purpose

Used to delete a static subnet VLAN entry.

Syntax

delete subnet_vlan [network <network_address> |ipv6network

<ipv6networkaddr>] [vlan <vlan_name 32> |vlanid <vlanid 1-4094>] {priority
<value 0-7>}

Description

This command is used to delete a subnet VLAN entry.
Subnet VLAN entries can be deleted by IP subnet or VLAN, or delete all subnet

VLAN entries.

Parameters

network

– To specify an IPv4 network address. The format is ipaddress/prefix length.

ipv6network

– To specify an IPv6 network address. The format is ipaddress/prefix

length.The prefix length of IPv6 network address shall not be greater than 64.

vlan

– The VLAN to be associated with the subnet. You can specify a VLAN name or

VLAN ID.

all –

All subnet VLAN entries will be deleted.

Restrictions

Only Administrator and Operator-level users can issue this command.

Example usage:

To delete subnet VLAN:

DGS-3700-12:5#delete subnet_vlan network 172.168.1.1/24

Command: delete subnet_vlan network 172.168.1.1/24

Success.

DGS-3700-12:5#

show subnet_vlan

Purpose

This command is used to show static subnet VLAN entries.

Syntax

show subnet_vlan {[network <network_address> |

ipv6network<ipv6networkaddr> | vlan <vlan_name 32> | vlanid <vidlist>]}

Description

This command is used to display subnet VLAN entries.

Parameters

network

– To specify an IPv4 network address. The format is ipaddress/prefix length.

ipv6network

– To specify an IPv6 network address. The format is ipaddress/prefix

length.The prefix length of IPv6 network address can not be greater than 64.

vlan

– The VLAN to be associated with the subnet. You can specify a VLAN name or

VLAN ID.

Restrictions

None.

Example usage:

To display subnet VLAN:

DGS-3700-12:5#show subnet_vlan network 172.168.1.1/24

Command: show subnet_vlan network 172.168.1.1/24

IP Address/Subnet mask VLAN Priority

-------------------------------------------- ------- ---------

172.168.1.0/255.255.255.0 3 2

DGS-3700-12:5#

Summary of Contents for DGS-3700 Series














































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DGS-3700 Series

Reviews:

Brands by name

Popular brands

D-Link DGS-3700 Series, Reference Manual

Search results

Summary of Contents for DGS-3700 Series

Reviews:

Brands by name

Popular brands