DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 223
config link_aggregation algorithm
Parameters
mac_source
- Indicates that the switch should examine the MAC source address.
mac_destination
- Indicates that the switch should examine the MAC destination
address.
mac_source_dest
- Indicates that the switch should examine the MAC source and
destination address.
ip_source
- Indicates that the switch should examine the IP source address.
ip_destination
- Indicates that the switch should examine the IP destination address.
ip_source_dest
- Indicates that the switch should examine the IP source and
destination address.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To configure link aggregation algorithm for mac-source-dest:
DGS-3700-12:5#config link_aggregation algorithm mac_source_dest
Command: config link_aggregation algorithm mac_source_dest
Success.
DGS-3700-12:5#
show link_aggregation
Purpose
Used to display the current link aggregation configuration on the Switch.
Syntax
show link_aggregation {group_id <value 1-6> | algorithm}
Description
This command will display the current link aggregation configuration of the Switch.
Parameters
group_id <value 1-6>
−
Specifies the group ID. The Switch allows up to 6 link
aggregation groups to be configured. The group number identifies each of the
groups.
algorithm
−
Allows users to specify the display of link aggregation by the algorithm in
use by that group.
Restrictions
None.
Example usage:
To display Link Aggregation configuration:
