DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 75
DGS-3700-12:5# show sim neighbor
Command: show sim neighbor
Neighbor Info Table
Port MAC Address Role
------ ------------------ ---------
1 00-35-26-00-11-99 Commander
1 00-35-26-00-11-91 Member
3 00-35-26-00-11-90 Candidate
Total Entries: 3
DGS-3700-12:5#
reconfig
Purpose
Used to connect to a member switch, through the commander switch, using Telnet.
Syntax
reconfig [member_id <value 1-32> | exit]
Description
This command is used to reconnect to a member switch using Telnet.
Parameters
member_id <value 1-32>
−
Select the ID number of the member switch to configure.
exit
– This command is used to exit from managing the member switch and will return
to managing the commander switch.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To connect to the MS, with member ID 2, through the CS, using the command line interface:
DGS-3700-12:5#reconfig member_id 2
Command: reconfig member_id 2
DGS-3700-12:5#
Login:
config sim_group
Purpose
Used to add candidates and delete members from the SIM group.
Syntax
config sim_group [add <candidate_id 1-100> {<password>} | delete <member_id
1-32>]
Description
This command is used to add candidates and delete members from the SIM group by ID
number.
Parameters
add <candidate_id> <password>
−
Use this parameter to change a candidate switch
(CaS) to a member switch (MS) of a SIM group. The CaS may be defined by its ID
number and a password (if necessary).
delete <member_id 1-32>
−
Use this parameter to delete a member switch of a SIM
group. The member switch should be defined by ID number.
Restrictions
Only Administrator and Operator-level users can issue this command.
Example usage:
To add a member: