DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 533
DGS-3700-12:5#show cfm counter packet
Command: show cfm counter packet
CFM RX Statistics
---------------------
Port CCM LBR LBM LTR LTM VidDrop OpcoDrop Sum
----- -------- -------- -------- -------- -------- -------- -------- -----
1 0 0 0 0 0 0 0 0
2 254 0 0 0 0 0 0 254
3 0 0 0 0 0 0 0 0
4 0 0 0 0 0 0 0 0
5 0 0 0 0 0 0 0 0
6 0 0 0 0 0 0 0 0
7 0 0 0 0 0 0 0 0
8 0 0 0 0 0 0 0 0
9 0 3 0 0 0 0 0 3
10 0 0 0 0 0 0 0 0
11 0 0 0 0 0 0 0 0
12 0 0 0 0 0 0 0 0
Total 254 3 0 0 0 0 0 257
CFM TX Statistics
---------------------
Port CCM LBR LBM LTR LTM Sum
----- -------- -------- -------- -------- -------- ------
1 0 0 0 0 0 0
2 284 0 0 0 4 292
3 578 0 0 0 0 578
4 578 0 0 0 0 578
5 578 0 0 0 0 578
6 578 0 0 0 0 578
clear cfm pkt_cnt
Purpose
Used to clear the CFM packet RX/TX counters.
Syntax
clear cfm pkt_cnt {[ports <portlist>{rx | tx}] | rx | tx | ccm}
Description
This command clears CFM packet counters.
Parameters
ports
– Specifies which ports’ counter to show. If not specified, all ports will be
shown.
{rx | tx}
– Shows RX or TX packet counter. If none is specified, both of them are
shown.
ccm
- Shows the CCM transmission state.
Restrictions
None.
Example usage:
To clear the CFM packet RX/TX counters:
DGS-3700-12:5#clear cfm pkt_cnt ports 2 rx
Command: clear cfm pkt_cnt ports 2 rx
Success.
DGS-3700-12:4#
