D-Link DGS-3700 Series Reference Manual Download Page 253

Page: 253 / 557

DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide

Page | 253

DGS-3700-12:5#delete mld_snooping static_group vlanid 1 FF12::1

Command: delete mld_snooping static_group vlanid 1 FF12::1

Success.

DGS-3700-12:5#

config mld_snooping static_group

Purpose

Used to configure the current MLD snooping static group on the Switch.

Syntax

config mld_snooping static_group [ vlan <vlan_name 32> | vlanid <vlanid_list> ]

<ipv6addr> [ add | delete] <portlist>

Description

This command is used to add or delete ports to/from the given static group.

Parameters

vlan

−

The name of the VLAN for which to configure MLD snooping static group

information.

vlanid

−

The list of the VLAN IDs for which to configure MLD snooping static group

information.

< ipv6addr >

−

The static group IPv6 address for which to configure MLD snooping

static group information.

[ add | delete] <portlist>

−

Portlist to add or delete.

Restrictions

Only Administrator and Operator-level users can issue this command.

Example usage:

To add port 5 to static group FF12::1 on VID 1:

DGS-3700-12:5#config mld_snooping static_group vlanid 1 FF12::1 add 5

Command: config mld_snooping static_group vlanid 1 FF12::1 add 5

Success.

DGS-3700-12:5#

show mld_snooping statistic counter

Purpose

Used to view the current MLD snooping statistic on the Switch.

Syntax

show mld_snooping statistic counter [vlan <vlan_name 32> | vlanid <vlanid_list>

| ports <portlist>]

Description

This command is used to view this information, MLD snooping must be enabled first.

Parameters

vlan

−

The name of the VLAN for which to view MLD snooping statistic counter.

vlanid

−

The list of the VLAN ID for which to view MLD snooping statistic counter.

ports

−

The list of the ports for which to view MLD snooping statistic counter.

Restrictions

Only Administrator and Operator-level users can issue this command.

Example usage:

To view MLD snooping statistic on VID 1:

Summary of Contents for DGS-3700 Series














































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DGS-3700 Series

Reviews:

Brands by name

Popular brands

D-Link DGS-3700 Series, Reference Manual

Search results

Summary of Contents for DGS-3700 Series

Reviews:

Brands by name

Popular brands