DGS-3700 Series Layer 2 Managed Gigabit Ethernet Switch CLI Reference Guide
Page | 150
show snmp host
Syntax
show snmp host {<ipaddr>}
Description
This command is used to display the IP addresses and configuration information of
remote SNMP managers that are designated as recipients of SNMP traps that are
generated by the Switch’s SNMP agent.
Parameters
<ipaddr>
−
The IP address of a remote SNMP manager that will receive SNMP traps
generated by the Switch’s SNMP agent.
Restrictions
None.
Example usage:
To display the currently configured SNMP hosts on the Switch:
DGS-3700-12:5#show snmp host
Command: show snmp host
SNMP Host Table
Host IP Address SNMP Version Community Name/SNMPv3 User Name
--------------- ------------ ------------------------------
10.48.76.23 V2c private
10.48.74.100 V3 authpriv public
Total Entries: 2
DGS-3700-12:5#
show snmp v6host
Purpose
Used to display the recipient of SNMP traps generated by the Switch’s SNMP agent.
Syntax
show snmp v6host {<ipv6addr>}
Description
This command is used to display the IP addresses and configuration information of
remote SNMP managers that are designated as recipients of SNMP traps generated
by the Switch’s SNMP agent.
Parameters
<ipv6addr>
−
The IPv6 address of a remote SNMP manager that will receive SNMP
traps generated by the Switch’s SNMP agent.
Restrictions
None.
Example usage:
To display the currently configured SNMP hosts on the Switch:
DGS-3700-12:5#show snmp v6host
Command: show snmp v6host
SNMP Host Table
------------------------------------------------------------------
Host IPv6 Address : ::C084:1
SNMP Version : V1
Community Name/SNMPv3 User Name : 2
Total Entries: 1
DGS-3700-12:5#
create trusted_host
Purpose
Used to create the trusted host.
