Modular L3 Ethernet Switch User’s Guide
75
5. Click to apply the new data.
6. Close
the
Aggregated Sub VLANs Table Edit
window.
To delete an Ethernet user-defined VLAN:
1. Display
the
Aggregated Sub VLANs Table
.
2. Select an entry in the table.
3. Click . The entry is deleted.
4. Click to update the device.
Configuring Ports
Port Properties
Use the
Port Properties
window to define parameters for the port selected in the front panel
display or from the Select Port Number field in the
Port Properties
window.
Note
:
The
Port Properties
window can also be accessed by clicking
on the front panel
display toolbar, or by right-clicking the selected port, or by pressing
Ctrl+T
.
To display the Port Properties screen:
Select
Device > Port > Port Properties
. The
Port Properties
window opens. The
Port
Properties
window has the following five tabs:
Main
–
Defines the general port settings including MAC address, port type, port
description, speed, administration status, port status, and full or half duplex modes.
Other –
Defines the back-pressure and flow control modes.
VLAN –
Defines the VLAN settings on a port.
IP –
Displays the IP addresses and network masks for a selected port.
IPX –
Displays the network addresses and network masks for a port
The default opening screen is the
Main
tab. The following paragraphs illustrate and describe
each screen tab.
The following figure illustrates the
Port Parameters
window
Main
tab.
Summary of Contents for DES-6300
Page 40: ...Modular L3 Ethernet Switch User s Guide 31 ...
Page 298: ......