D-Link DES-6300, User Manual, Page: 177 / 298

Modular L3 Ethernet Switch User’s Guide
168
Figure 6- 126. DCHP Relay Table - Insert
3. Complete the fields.
4. Click .
5. Close the DCHP Relay Table Insert window. The DCHP Relay Table is displayed.
6. Click . When the Status field displays “Finished!”, the fields are confirmed as
modified.
To modify a DHCP Relay Table entry:
1. Display the DCHP Relay Table.
2. Select an entry in the table.
3. Click . The DCHP Relay Table window is displayed.
4. Click . When the Status field displays “ Finished!”, the fields are confirmed as
modified.
VRRP
Configuring VRRP
The Virtual Router Redundancy Protocol (VRRP) dynamically assigns responsibility
for virtual routers to the VRRP routers on a LAN. This allows several routers on a
multi-access link to utilize a single virtual IP address.
VRRP routers are configured to run the VRRP protocol with other routers attached to
a LAN. In a VRRP setup, one router is elected as the master router with the other
routers function as redundant routers. The router election process provides a fail-over
for forwarding responsibility if the Master router is unavailable.
The
VRRP Operation Table sets VRRP routing parameters. To open the VRRP
Operation Table :
Select Router > IP > VRRP > VRRP Operations Table . The VRRP Operation Table
opens.