D-Link DES-6300, User Manual, Page: 148 / 298

Modular L3 Ethernet Switch User’s Guide
139
Type – The filter is for input or output.
Status – The filter is valid or not.
Network Address – The IP address network.
Number of Match Bits – The number of bits to match the network IP address. A
value less than 32 represents a wildcard.
Filter Action – This parameter is used to fine-tune other filters. For example set a
filter to block all RIP messages with net address 192.114 and set another filter
entry to permit all RIP messages with the network 192.114.25. All RIP messages
with the network 192.114 that do not end in 25 are blocked.
•
Permit – Whether the indicated packets should be forwarded.
•
Deny – Whether the indicated packets should be blocked.
To add a RIP interface filter:
1. Display the IP Interface RIP Filter Table.
2. Click . The
IP Interface RIP Filter Table Insert window opens:
Figure 6- 100. IP Interface RIP Filter Table Insert window
3. Complete the fields.
4. Click .
5. Close the IP Interface Filter RIP Table Insert window. The IP Interface RIP Filter
Table opens.
6. Click . When the Status field displays “ Finished !”, the fields are confirmed as
modified.
To edit a RIP interface filter:
1. Display the IP Interface RIP Filter Table.