manualshive.com logo in svg

D-Link DES-6300, User Manual, Page: 189 / 298

Share
Download
D-Link DES-6300 User Manual Download Page 189

Modular L3 Ethernet Switch User’s Guide

 

180 

 

 

Figure 6- 138. IGMP Interface Table window 

 
The

 

IGMP Interface Table

 displays the following fields: 

 

 

IfIndex – 

Identifies the port number for which IGMP is enabled. 

 

Query Interval – 

Indicates the amount of time in seconds that querier messages 

are transmitted. Network managers can adjust the amount of IGMP messages sent 
on sub-networks by adjusting the value of the Query Interval. The larger value, the 
less often IGMP messages are sent. The default value is 125 seconds. 

 

Version – 

Indicates the current software version of IGMP. The default software 

version is 2. 

 

Note

:

  

All routers on a LAN must be configured to the same IGMP software version.

 

 

 

Querier – 

Indicates the IGMP Querier on the IP subnet. The multicast router with 

the lowest IP address is the multicast querier. 

 

Query Max Response Time – 

Indicates the maximum response time for 

advertising IGMP queries. Query Max Response time adjusts the amount of traffic 
on a per sub-network basis. Varying the response time effects the burstiness of 
network traffic. The higher the value the longer period of time passes between host 
responses. The default value is 10 seconds. 

 

Note

:

  

The Query Max Response Time must be less than the Query Interval.

 

 

 

Querier UpTime – 

Indicates the amount of time in ticks since the querier was 

last changed. 

 

Querier Expiry Time – 

Indicates the amount of time in ticks before the Querier 

Present timer expires. If the local system is the Querier the value is 0. 

 

Wrong Version Queries – 

Indicates the amount of queries received with the 

IGMP software version that do not match the IGMP interface’s software version. 
If queries are received with a different software version the Wrong Software 
version Queries indicates a configuration error. 

 

Joins – 

Indicates the number of times a group membership has been added to the 

IGMP

 

Cache Table.

 

 

Proxy ifIndex – 

Indicates that IGMP is performed by proxy. IGMP Host 

Membership reports are sent to the device. A value of 0 indicates that IGMP 
proxying is not being performed. The default is 0. 

Summary of Contents for DES-6300











































































































































































































































































































Reviews:

No comments