D-Link DES-6300, User Manual, Page: 170 / 298

Modular L3 Ethernet Switch User’s Guide
161
Figure 6- 119. DHCP Address Range Table
The
DHCP Address Range Table contains the following fields:
IP Address Interface —Indicates the interface IP address.
IP Address From —Indicates the first IP address allocated.
IP Address —Indicates the last IP address allocated.
Default Router —The IP default gateway Address.
Lease Time —Indicates the parameter is used to gain the maximum lease-time for
a new IP address. Set this field to 0xffffffff for automatic allocation.
Probe Enable —Enables automatic ICMP echo request probes of a used address
before reallocation. This parameter is used to verify that the address is currently
not in use by a client. The possible field values are:
•
Enable — Enables automatic ICMP echo request probes of a used address
before reallocation.
•
Disable — Disables automatic ICMP echo request probes of a used address
before reallocation.
Total Addresses Number —Indicates the total number of available IP Addresses
to choose from, including those currently in use.
Free Addresses Number —Indicates the number of available IP Addresses for
new allocation.
DHCP Addresses Number —Indicates the number of IP Addresses currently
being used by DHCP.
To add a DHCP Address Range:
1. Display the DHCP Address Range Table.
2. Click . The DHCP Address Range Insert window is displayed.