Modular L3 Ethernet Switch User’s Guide
126
Figure 6- 87. IP Router Interface Parameters Insert window
3. Enter the IP Address and Network Mask as determined by the network setup.
4. Select an interface number from the Interface Number list. This list contains all physical
interfaces and all IP VLANs. If a required physical interface combination is not listed,
use the
VLAN Table
to define the desired combination.
5. Click to confirm the new IP Interface.
6. Repeat steps 2-5 for all new IP interfaces.
To edit a device IP interface:
1. Display
the
IP Router Interface Parameters
window.
2. Select an entry and click
.
The IP Router Interface Parameters Edit
window
opens:
Summary of Contents for DES-6300
Page 40: ...Modular L3 Ethernet Switch User s Guide 31 ...
Page 298: ......