D-Link DES-6300, User Manual, Page: 271 / 298

Modular L3 Ethernet Switch User’s Guide
262
Configuring Trap Parameters
To configure the number of traps displayed in the Traps Table and how many traps stored in a
file:
From the
General Options window Menu Bar, click Traps and then select Traps
Configuration . The following Traps Configuration window opens:
Figure 6- 216. Traps Configuration window
The following parameters are displayed in the
Traps Configuration window:
Maximal number of traps to display – How many traps are displayed in the
Traps Table. By default, 500 traps can be displayed .
Maximal number of traps to keep in file – How many traps to store in a file.
The default value is 5000, i.e. 5000 traps are stored by the system in the file called
autotraps.dat
.
The maximal number of traps to keep on file must be greater than the maximal number of traps
to display. For example, with maximal number of traps to display set to 100 and maximal
number of traps to keep in file is set to more than 100.
If 150 new traps arrive, the most recent 100 traps are displayed in the Traps Table and the rest of
the new traps (50 traps) are stored in the
autotraps.dat
file.
Enter the two parameters and press. The configuration is saved and the Traps Table opens.
Log Table
The
Statistics log table consists of entries generated by a device when triggering events. Those
events are triggered once the traffic crosses a threshold, by either Falling or Rising actions, set to
LOG or LOG and TRAP.