D-Link DES-6300, User Manual, Page: 80 / 298

Modular L3 Ethernet Switch User’s Guide
71
Figure 6- 35. Aggregate VLAN Table
The Aggregate VLAN Table contains the following fields:
Aggregate VLAN Index —Specifies the aggregated VLAN ID. The index
number starts from 10,000.
Aggregate VLAN Name —Indicates the user-defined name of the aggregated
VLAN.
PhysAddress Type —Specifies if the VLAN physical address is the default
physical address. The VLAN address is not the physical address, the address is
chosen from the device physical address reserve. The possible values are:
•
default —Indicates that the VLAN’s physical is the default physical
address. This is the default value.
•
reserve —Indicates that the VLAN’s physical is one of the device reserve
physical addresses.
To add an entry to the Aggregated VLAN Table:
1. Display the Aggregated VLANs Table window.
2. Click . The Aggregated VLANs Table Insert window is displayed.