D-Link DES-6300 User Manual Download Page 122

Page: 122 / 298

Modular L3 Ethernet Switch User’s Guide

113

Select

Bridge > Spanning Tree > Spanning Tree Port Table

. The

Spanning Tree Port Table

opens:

Figure 6- 73. Spanning Tree Port Table window

The

Spanning Tree Port Table

displays the following fields:

Port –

Indicates the port number to which the STP applies.

Priority –

Indicates the priority value of the port. The Priority value can be used

to influence the choice of port when a bridge has two ports connected in a loop.

PortState –

Indicates the current STP state of a port. If enabled

Port State

determines what forwarding action is taken on traffic. If the bridge discovers a
malfunctioning port, the port is placed in the

Broken State

. The possible values

are:

•

Disabled

–

STP is currently disabled on the port. The port forwards

traffic while

learning

MAC addresses.

•

Blocking

–

The port is currently blocked and cannot be used to forward

traffic or learn MAC addresses.

•

Listening

–

The port is currently in the

listening

mode. The port cannot

forward traffic nor can it learn MAC addresses.

•

Learning

–

The port is currently in the learning mode. The port cannot

forward traffic however it can learn new MAC addresses.

•

Forwarding

–

The port is currently in the forwarding mode. The port can

forward traffic and learn new MAC addresses.

•

Broken

–

The port is currently malfunctioning and cannot be used for

forwarding traffic.

Port Enable –

Indicates if the STP is enabled on the port. If the port is disabled,

the PortState is forwarding.

Path Cost –

The amount this port contributes to the Root Path Cost. The Path

Cost can be adjustable to a higher or lower value, and can be used to forward
traffic towards or away from a path being rerouted.

Designated Root –

The Designated Bridge transmits a unique Bridge Identifier as

the

root

in the CMs.

Designated Cost –

The Designated Port path cost of network segments connected

to this port. This value is compared to the Root Path Cost field in received CMs.

Designated Bridge –

Identifies which bridge is the designated bridge for the port.

Port Designated Port –

Identifies the port on the designated bridge.

Summary of Contents for DES-6300











































































































































































































































































































Search results

Summary of Contents for DES-6300

Reviews:

D-Link DES-6300, User Manual, Page: 122 / 298

Search results

Summary of Contents for DES-6300

Reviews: