D-Link DES-6300, User Manual, Page: 111 / 298

Modular L3 Ethernet Switch User’s Guide
102
Trunk Balance Table
The Trunk Balance Table displays information about the criterions for balancing the
corresponding trunk indexes.
To display the Trunk Balance Table:
Select Device > Trunk > Trunk Balance Table , the Trunk Balance Table opens:
Figure 6- 63. Trunk Balance Table window
The Trunk Balance Table window displays the following fields:
Index – Identifies the trunk number.
Forward Type – Balances the trunk in either 1 of 2 modes. The possible values
are:
•
Bridging
•
Routing
Layer – Specifies the Balance Layer that the trunk used for the specified Forward
Type, the possible values are:
• 2 – Indicates that layer 2 is being used as the balance layer.
•
3 – Indicates that layer 3 is being used as the balance layer.
• 4 – Indicates that layer 4 is being used as the balance layer.
Used Addresses – Specifies the network layer addresses used for balancing
unicast frames. The possible values are:
•
NotApplied – Indicates that a network layer address is not used for
balancing unicast frames.