D-Link DES-6300, User Manual, Page: 213 / 298

Modular L3 Ethernet Switch User’s Guide
204
RIP Circuit Filter – Defines the type of traffic that the filter applies to, the
network addresses the filter affects, network masks, and taken on a packet.
SAP Global Filter – Defines the type of traffic that the filter applies to, the
network addresses the filter affects, network masks, the service type, and action
taken on a packet.
SAP Circuit Filter – Defines the type of traffic that the filter applies to, the
network addresses the filter affects, network masks, the service type, and action
taken on a packet.
Press the
RIP Global Filter button and complete the RIP Global Filter table fields.
Press the
RIP Circuit Filter button and complete the RIP Global Circuit Fields window fields.
Press the
SAP Global Filter button and complete the SAP Global Filter table fields.
Press the
SAP Circuit Filter button and complete the SAP Global Circuit Fields window
fields.
To display the RIP Global Filter Table:
1. Display the IPX RIP/SAP Filter window.
2. Press the RIP Global Filter button. The RIP Global Filter Table opens:
Figure 6- 161. RIP Global Filter Table window
The RIP Global Filter Table displays the following parameters:
Type – Defines whether the current filter entry works on traffic coming into or
out of the device.
Network Address – Type in the network pattern the filter entry is to affect. The
network pattern works in conjunction with the network mask to define the filter
entry.