
Modular L3 Ethernet Switch User’s Guide
209
3. Click . The filter is deleted.
4. Click . When the
Status
field displays “
Finished!”,
the fields are confirmed as
modified.
To display the SAP Global Filters:
1. Display
the
IPX RIP/SAP Filter
window.
2. Press
the
SAP Global Filter
button. The
SAP Global Filter Table
opens:
Figure 6- 166. SAP Global Filter Table window
The
SAP Global Filter Table
displays the following parameters:
Type –
Defines whether the current filter entry works on traffic coming into or
out of the device.
Network Address –
Type in the network pattern to affect the filter entry. The
network pattern works in conjunction with the network mask to define the filter
entry.
Network Mask –
Type in the letters F, 8, C, E, and 0 as many times as desired to
indicate which part of the network pattern is important. The mask must be
continuous from left to right. 00000000 means all addresses, ffffffff means one
address (no address range). A combination of f 0 indicates a specific range. This
combination must have f on the left side, 0 on the right side, and a single F, 8, C,
or E, or 0 between them.
For example, if the network pattern is set to 12345678, the network mask
can be set to ffff0000 to indicate that only the first four numbers of the
network pattern are only checked, and the remaining numbers are
Summary of Contents for DES-6300
Page 40: ...Modular L3 Ethernet Switch User s Guide 31 ...
Page 298: ......