manualshive.com logo in svg

D-Link DES-6300, User Manual, Page: 42 / 298

Share
Download
D-Link DES-6300 User Manual Download Page 42

Modular L3 Ethernet Switch User’s Guide

 

33 

 

The main window displayed above is used for managing ConfigMaster. It also contains general 
information about other ConfigMaster windows and buttons, and describes how to add optional 
features to devices. 

Installation 

This section contains the system requirements and installation instructions for the ConfigMaster, 
and includes the following topics:  
 

 

General System Requirements

 - Describes the general system requirements for 

hardware, software and web based installations. 

 

Installing ConfigMaster

 - Describes the procedure for installing ConfigMaster. 

General System Requirements 

Hardware Requirements 

The hardware requirements are as follows: 
 

 

Pentium-Based Machine. 

 

Windows NT 4.0, Windows 95 or Windows 98. 

 

32Mb RAM (64Mb RAM or More Is Recommended). 

 

50 Mb Hard Disk Space. 

 

CD-ROM Drive. 

 

800 x 600 (Minimum Recommended) Screen Resolution. 

Software Requirements 

The software requirements are as follows: 
 

 

Microsoft Internet Explorer Version 4.01 or Above. 

 

OR  

 

Netscape Communicator Version 4.5 or Above. 

 

Java Virtual Machine supporting Java version 1.1.4 and Above. 

 
In addition, ConfigMaster runs with:  
 

 

Sun JVM (JRE). 

 

Microsoft JVM (Wjview). 

 

The DES-6300 has been verified to run with Microsoft’s JVM (Wjview) and Sun’s JVM (jREw). 
In case of JRE, we recommend not to use version 1.1.7A because of a known bug. If you decide 
to use SUN’s JVM, it is included on the CD-ROM- “

Util\Tools\jre117Bi-

win32.exe

”. 

 
If you don’t have a JVM, you can download one of the following: 
Sun’s JVM (JRE) – 

http://java.sun.com/products/jdk/1.1/jre/index.html

 

Microsoft JVM (Jview) (comes with Microsoft Internet Explorer version 4.01 or above) – 

http://www.microsoft.com/windows/ie/download

 

 

Summary of Contents for DES-6300











































































































































































































































































































Reviews:

No comments