D-Link DES-3226L, Cli Command Reference

Page: 63 / 128

Switching Commands 63
set igmp groupmembership-interval
This command sets the IGMP Group Membership Interval time on one interface or all interfaces. The
Group Membership Interval time is the amount of time in seconds that a switch waits for a report from a
particular group on a particular interface before deleting the interface from the entry. This value must be
greater than the IGMPv3 Maximum Response time value. The range is 2 to 3600 seconds.
Default
260 seconds
Format
set igmp groupmembership-interval <vlanId> <2-3600>
Modes
Interface Config
Global Config
no set igmp groupmembership-interval
This command sets the IGMPv3 Group Membership Interval time to the default value.
Format
no set igmp groupmembership-interval
Modes
Interface Config
Global Config
set igmp maxresponse
This command sets the IGMP Maximum Response time for the system, on a particular interface or
VLAN. The Maximum Response time is the amount of time in seconds that a switch will wait after
sending a query on an interface because it did not receive a report for a particular group in that interface.
This value must be less than the IGMP Query Interval time value. The range is 1 to 3599 seconds.
Default
10 seconds
Format
set igmp maxresponse <1-3599>
Modes
Global Config
Interface Config
VLAN Mode
no set igmp maxresponse
This command sets the IGMP Maximum Response time (on the interface or VLAN) to the default
value.
Format
no set igmp maxresponse
Modes
Global Config
Interface Config
VLAN Mode
set igmp mcrtexpiretime
This command sets the Multicast Router Present Expiration time. The time is set for the system, on a
particular interface or VLAN.
This is the amount of time in seconds that a switch waits for a query to be received on an interface
before the interface is removed from the list of interfaces with multicast routers attached. The range is 0
to 3600 seconds. A value of 0 indicates an infinite time-out, i.e. no expiration.