D-Link DES-3226L, Cli Command Reference

Page: 15 / 128

About This Book 15
About This Book
This document describes the command-line interface (CLI) commands that you use to view and
configure settings for the D-Link DES-3226L switch.
Audience
This document is intended for system administrators who configure and operate systems using D-Link
DES-3226L software. It provides an understanding of the configuration options of the D-Link DES-
3226L software. This document assumes that the reader has a basic knowledge of Ethernet and
networking concepts.
Document Organization
This document is organized into the following sections:
z
“D-Link DES-3226L Overview” on page 17 introduces the D-Link DES-3226L software at a very
high level.
z
“Command Structure” on page 19 describes the command format and syntax.
z
“Command-Line Interface Modes” on page 25 explains the CLI command modes.
z
“Setup and Management Commands” on page 29 describes the commands you use to configure
management access and basic port settings.
z
“Switching Commands” on page 51 describes the commands you use to configure and view switch
properties, such as VLANs and protected ports.
z
“Access and Security Commands” on page 83 describes how to configure the device for secure
access.
z
“System Maintenance Commands” on page 105 describes the commands you use to view system
information, view and configure system logs, troubleshoot connectivity, and restore various set-
tings to their factory defaults.
Trademarks
Contents subject to change without prior notice.
D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. All other trademarks
belong to their respective proprietors.
Copyright Statement
Copyright
©
2006 D-Link Corporation.
No part of this publication may be reproduced in any form or by any means or used to make any
derivative such as translation, transformation, or adaptation without permission from D-Link
Corporation/D-Link Systems Inc., as stipulated by the United States Copyright Act of 1976.