D-Link DES-3226L, Cli Command Reference

Page: 25 / 128

Command-Line Interface Modes 25
Command-Line Interface Modes
The CLI groups all the commands into modes according to the nature of the commands. This section
describes the CLI command modes for the D-Link DES-3226L switch. Each of the command modes
supports specific D-Link DES-3226L software commands.
Table 6 lists the command modes and the prompts visible in that mode. It also explains how to enter or
exit each mode.
Table 6.
CLI Command Modes
Command
Mode
Access Method Prompt
Exit or Access
Previous Mode
User EXEC
Mode This is the first level of
access. Perform basic
tasks and list system
information. Switch> Enter Logout com-
mand
Privileged
EXEC
Mode From the User EXEC
mode, enter
enable
Switch# To exit to the User
EXEC mode, enter
exit
or press
Ctrl-Z
.
VLAN
Mode From the Privileged
EXEC mode, enter
vlan database
Switch (Vlan)# To exit to the Privi-
leged EXEC mode,
enter the
exit
com-
mand, or press
Ctrl-Z
to switch to
the User EXEC
mode.
Global
Config
Mode From the Privileged
EXEC mode, enter
configure
Switch (Config)# To exit to the Privi-
leged EXEC mode,
enter the
exit
com-
mand, or press
Ctrl-Z
to switch to
the User EXEC
mode.
Interface
Config
Mode From the Global Config
mode, enter
interface
<slot/port>
Switch (Interface <slot/port>)# To exit to the Global
Config mode, enter
the
exit
command.
To return to the User
EXEC mode, enter
Ctrl-Z
.
Line Config
Mode From the Global Config
mode, enter
lineconfig
Switch (line)# To exit to the Global
Config mode, enter
the
exit
command.
To return to the User
EXEC mode, enter
Ctrl-Z
.