D-Link DES-3226L, Cli Command Reference

Page: 84 / 128

84 D-Link DES-3226L Command Line Reference
eight alphanumeric characters. The username and password are not case-sensitive. When you change a
password, a prompt asks for the old password. If there is no password, press enter.
Default.
no password
Format.
users passwd <username>
Mode
Global Config
no users passwd
This command sets the password of an existing user to blank. When you change a password, a prompt
asks for the old password. If there is no password, press enter.
Format.
no users passwd <username>
Mode.
Global Config
users snmpv3 accessmode
This command specifies the snmpv3 access privileges for the specified login user. The valid
accessmode values are
readonly
or
readwrite
. The <
username>
is the login user name for which
the specified access mode applies. The default is
readwrite
for the “admin” user and
readonly
for
all other users
Default
admin - readwrite; other - readonly
Format
users snmpv3 accessmode <username> {readonly | readwrite}
Mode
Global Config
no users snmpv3 accessmode
This command sets the snmpv3 access privileges for the specified user as readwrite for the “admin”
user and readonly for all other users. The <username> value is the user name for which the specified
access mode will apply.
Format
no users snmpv3 accessmode <username>
Mode
Global Config
users snmpv3 authentication
This command specifies the authentication protocol to be used for the specified user. The valid
authentication protocols are
none
,
md5
or
sha
. If you specify
md5
or
sha
, the login password is also
used as the snmpv3 authentication password and therefore must be at least eight characters in length.
The <
username
>
is the user name associated with the authentication protocol.
Default
no authentication
Format
users snmpv3 authentication <username> {none | md5 | sha}
Mode
Global Config