D-Link DES-3226L, Cli Command Reference

Page: 77 / 128

Switching Commands 77
Port Role
The role of the specified port within the spanning tree.
Link Status
The operational status of the link. Possible values are “Up” or “Down”.
Link Trap
The link trap configuration for the specified interface.
show spanning-tree mst summary
This command displays summary information about all multiple spanning tree instances in the switch.
On execution, the following details are displayed.
Format
show spanning-tree mst summary
Modes
Privileged EXEC
User EXEC
MST Instance ID List
List of multiple spanning trees IDs currently configured.
For each MSTID:
Associated FIDs
List of forwarding database identifiers associated with this instance.
Associated VLANs
List of VLAN IDs associated with this instance.
show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree instance. The
<vlanid> corresponds to an existing VLAN ID.
Format
show spanning-tree vlan <vlanid>
Modes
Privileged EXEC
User EXEC
VLAN Identifier
The VLANs associated with the selected MST instance.
Associated Instance
Identifier for the associated multiple spanning tree instance or “CST”
if associated with the common and internal spanning tree.
GVRP Commands
This section describes the commands you use to configure and view GARP VLAN Registration
Protocol (GVRP) information. GVRP-enabled switches exchange VLAN configuration information,
which allows GVRP to provide dynamic VLAN creation on trunk ports and automatic VLAN pruning.
NOTE: If GVRP is disabled, the system does not forward GVRP messages.
set gvrp adminmode
This command enables GVRP.
Default disabled
Format
set gvrp adminmode
Mode
Privileged EXEC