78
D-Link DES-3226L Command Line Reference
no set gvrp adminmode
This command disables GVRP.
Format
no set gvrp adminmode
Mode
Privileged EXEC
set gvrp interfacemode
This command enables GVRP.
Default
disabled
Format
set gvrp interfacemode
Modes
Interface Config
Global Config
no set gvrp interfacemode
This command disables GVRP. If GVRP is disabled, Join Time, Leave Time and Leave All
Time have no effect.
Format
no set gvrp interfacemode
Modes
Interface Config
Global Config
show gvrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one
or all interfaces.
Format
show gvrp configuration {<
slot/port
> | all}
Modes
Privileged EXEC
User EXEC
Interface
Valid slot and port number separated by forward slashes.
Join Timer
Specifies the interval between the transmission of GARP PDUs registering
(or re-registering) membership for an attribute. Current attributes are a VLAN
or multicast group. There is an instance of this timer on a per-Port, per-GARP
participant basis. Permissible values are 10 to 100 centiseconds (0.1 to 1.0
seconds). The factory default is 20 centiseconds (0.2 seconds). The finest
granularity of specification is one centisecond (0.01 seconds).
Leave Timer
Specifies the period of time to wait after receiving an unregister request for an
attribute before deleting the attribute. Current attributes are a VLAN or multi-
cast group. This may be considered a buffer time for another station to assert
registration for the same attribute in order to maintain uninterrupted service.
There is an instance of this timer on a per-Port, per-GARP participant basis.
Permissible values are 20 to 600 centiseconds (0.2 to 6.0 seconds). The fac-
tory default is 60 centiseconds (0.6 seconds).
LeaveAll Timer
This Leave All Time controls how frequently LeaveAll PDUs are gener-
ated. A LeaveAll PDU indicates that all registrations will shortly be deregis-
tered. Participants will need to rejoin in order to maintain registration. There
Summary of Contents for DES-3226L
