D-Link DES-3226L, Cli Command Reference

Page: 71 / 128

Switching Commands 71
spanning-tree mst instance
This command adds a multiple spanning tree instance to the switch. The parameter <mstid> is a number
within a range of 1 to 4094, that corresponds to the new instance ID to be added. The maximum number
of multiple instances supported by the D-Link DES-3226L switch is 4.
Format
spanning-tree mst instance <mstid>
Mode
Global Config
no spanning-tree mst instance
This command removes a multiple spanning tree instance from the switch and reallocates all VLANs
allocated to the deleted instance to the common and internal spanning tree. The parameter <mstid> is a
number that corresponds to the desired existing multiple spanning tree instance to be removed.
Format
no spanning-tree mst instance <mstid>
Mode
Global Config
spanning-tree mst priority
This command sets the bridge priority for a specific multiple spanning tree instance. The parameter
<mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The
priority value is a number within a range of 0 to 61440 in increments of 4096.
If you specify 0 (defined as the default CIST ID) as the <mstid>, this command sets the Bridge Priority
parameter to a new value for the common and internal spanning tree. The bridge priority value is a
number within a range of 0 to 61440. The twelve least significant bits are masked according to the
802.1s specification. This causes the priority to be rounded down to the next lower valid priority.
Default
32768
Format
spanning-tree mst priority <mstid> <0-61440>
Mode
Global Config
no spanning-tree mst priority
This command sets the bridge priority for a specific multiple spanning tree instance to the default value,
i.e. 32768. The parameter <mstid> is a number that corresponds to the desired existing multiple
spanning tree instance.
If 0 (defined as the default CIST ID) is passed as the <mstid>, this command sets the Bridge Priority
parameter for the common and internal spanning tree to the default value, i.e. 32768.
Format
spanning-tree mst priority <mstid>
Mode
Global Config
spanning-tree mst vlan
This command adds an association between a multiple spanning tree instance and a VLAN so that the
VLAN is no longer associated with the common and internal spanning tree. The parameter <mstid> is a