D-Link DES-3226L, Cli Command Reference

Page: 70 / 128

70 D-Link DES-3226L Command Line Reference
no spanning-tree max-hops
This command sets the Bridge Max Hops parameter for the common and internal spanning tree to the
default value.
Format
no spanning-tree max-hops
Mode
Global Config
spanning-tree mst
This command sets the Path Cost or Port Priority for this port within the multiple spanning tree instance
or in the common and internal spanning tree. If you specify an <mstid> parameter that corresponds to an
existing multiple spanning tree instance, the configurations are done for that multiple spanning tree
instance. If you specify 0 (defined as the default CIST ID) as the <mstid>, the configurations are done
for the common and internal spanning tree instance.
If you specify the cost option, the command sets the path cost for this port within a multiple spanning
tree instance or the common and internal spanning tree instance, depending on the <mstid> parameter.
You can set the path cost as a number in the range of 1 to 200000000 or
auto . If you select auto the path
cost value is set based on Link Speed.
If you specify the external-cost option, this command sets the external-path cost for MST instance ‘0’
i.e. CIST instance. You can set the external cost as a number in the range of 1 to 200000000 or auto . If
you specify auto, the external path cost value is set based on Link Speed.
If you specify the port-priority option, this command sets the priority for this port within a specific
multiple spanning tree instance or the common and internal spanning tree instance, depending on the
<mstid> parameter. The port-priority value is a number in the range of 0 to 240 in increments of 16.
Default
cost: auto; external-cost: auto; port-priority: 128
Format
spanning-tree mst
<
mstid> {{cost <1-200000000> | auto} |
{external-cost <1-200000000> | auto}| port-priority <0-240>}
Mode
Interface Config
no spanning-tree mst
This command sets the Path Cost or Port Priority for this port within the multiple spanning tree instance,
or in the common and internal spanning tree to the respective default values. If you specify an <mstid>
parameter that corresponds to an existing multiple spanning tree instance, you are configuring that
multiple spanning tree instance. If you specify 0 (defined as the default CIST ID) as the <mstid>, you
are configuring the common and internal spanning tree instance.
If the you specify cost , this command sets the path cost for this port within a multiple spanning tree
instance or the common and internal spanning tree instance, depending on the <mstid> parameter, to the
default value, i.e. a path cost value based on the Link Speed. If you specify
external-cost , this
command sets the external path cost for this port for mst ‘0’ instance, to the default value, i.e. a path
cost value based on the Link Speed. If you specify
port-priority , this command sets the priority for this
port within a specific multiple spanning tree instance or the common and internal spanning tree
instance, depending on the <mstid> parameter, to the default value, i.e. 128.
Format
no spanning-tree mst <mstid> {cost | external-cost | port-priority}
Mode
Interface Config