D-Link DES-3226L, Cli Command Reference

Page: 46 / 128

46 D-Link DES-3226L Command Line Reference
snmp-server enable traps stpmode
This command enables the sending of new root traps and topology change notification traps.
Default
enabled
Format
snmp-server enable traps stpmode
Mode
Global Config
no snmp-server enable traps stpmode
This command disables the sending of new root traps and topology change notification traps.
Format
no snmp-server enable traps stpmode
Mode
Global Config
snmptrap
This command adds an SNMP trap receiver. The maximum length of <name> is 16 case-sensitive
alphanumeric characters. The <snmpversion> is the version of SNMP. The version parameter options
are snmpv1 or snmpv2.
Note: The <name> parameter does not need to be unique; however; the <name> and
<ipaddr> pair must be unique. Multiple entries can exist with the same <name>, as
long as they are associated with a different <ipaddr>. The reverse scenario is also
acceptable. The <name> is the community name used when sending the trap to the
receiver, but the <name> is not directly associated with the SNMP Community Table
Default
snmpv2
Format
snmptrap <name> <ipaddr> [snmpversion <snmpversion>]
Mode
Global Config
no snmptrap
This command deletes trap receivers for a community.
Format
no snmptrap <name> <ipaddr>
Mode
Global Config
snmptrap snmpversion
This command modifies the SNMP version of a trap. The maximum length of <name> is 16 case-
sensitive alphanumeric characters. The <snmpversion> parameter options are snmpv1 or snmpv2.
Note: This command does not support a “no” form.
Default.
snmpv2
Format
snmptrap snmpversion <name> <ipaddr> <snmpversion>
Mode
Global Config