D-Link DES-3226L, Cli Command Reference

Page: 74 / 128

74 D-Link DES-3226L Command Line Reference
Bridge Identifier
The bridge identifier for the selected MST instance. It is made up using
the bridge priority and the base MAC address of the bridge.
Bridge Max Age
Configured value.
Bridge Max Hops
Bridge max-hops count for the device.
Bridge Hello Time
Configured value.
Bridge Forward Delay
Configured value.
Bridge Hold Time
Minimum time between transmission of Configuration Bridge Protocol
Data Units (BPDUs)
show spanning-tree summary
This command displays spanning tree settings and parameters for the switch. The following details are
displayed on execution of the command.
Format
show spanning-tree summary
Modes
Privileged EXEC
User EXEC
Spanning Tree Adminmode
Enabled or disabled.
Spanning Tree Version
Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w,
or IEEE 802.1d) based upon the Force Protocol Version parameter.
Configuration Name
Identifier used to identify the configuration currently being used.
Configuration Revision Level
Identifier used to identify the configuration currently
being used.
Configuration Digest Key
Identifier used to identify the configuration currently being
used.
MST Instances
List of all multiple spanning tree instances configured on the switch
show spanning-tree interface
This command displays the settings and parameters for a specific switch port within the common and
internal spanning tree. The <slot/port> is the desired switch port. The following details are displayed on
execution of the command.
Format
show spanning-tree interface <
slot/port
>
Mode
Privileged EXEC
User EXEC
Hello Time
Admin hello time for this port.
Port mode
Enabled or disabled.
Port Up Time Since Counters Last Cleared
Time since port was reset, displayed in
days, hours, minutes, and seconds.
STP BPDUs Transmitted
Spanning Tree Protocol Bridge Protocol Data Units sent