D-Link DES-3226L, Cli Command Reference

Page: 118 / 128

118 D-Link DES-3226L Command Line Reference
clear pass
This command resets all user passwords to the factory defaults without powering off the switch. You are
prompted to confirm that the password reset should proceed.
Format
clear pass
Mode
Privileged EXEC
enable passwd
This command prompts you to change the Privileged EXEC password.
Format
enable passwd
Mode
User EXEC
clear port-channel
This command clears all port-channels (LAGs).
Format
clear port-channel
Mode
Privileged EXEC
clear traplog
This command clears the trap log.
Format
clear traplog
Mode
Privileged EXEC
clear vlan
This command resets VLAN configuration parameters to the factory defaults.
Format
clear vlan
Mode
Privileged EXEC
logout
This command closes the current telnet connection or resets the current serial connection.
Note: Save configuration changes before logging out.
Format
logout
Mode
Privileged EXEC
ping
This command checks if another computer is on the network and listens for connections. To use this
command, configure the switch for network (in-band) connection. The source and target devices must
have the ping utility enabled and running on top of TCP/IP. You can ping the switch from any IP
workstation the switch is connected to through the default VLAN (VLAN 1), as long as there is a