D-Link DES-3226L, Cli Command Reference

Page: 115 / 128

System Maintenance Commands 115
no logging persistent
This command disables logging. It does not clear the contents of the log.
Format
no logging persistent
Mode
Global Config
logging host
This command enables logging to a host where up to eight hosts can be configured. The
<port>
value
is a port number. The
<severitylevel>
value is specified as either an integer from 0 to 7 or
symbolically through one of the following keywords: EMERGENCY (0), ALERT (1), CRITICAL (2),
ERROR (3), WARNING (4), NOTICE (5), INFORMATIONAL (6), DEBUG (7).
Default
Port - 514; Level - Critical;
Format
logging host <ipaddress> [<port>] [<severitylevel>]
Mode
Global Config
logging host remove
This command disables logging to host. See “show logging hosts” on page 116 for a list of host indices.
Format.
logging host remove <hostindex>
Mode
Global Config
logging syslog
This command enables syslog logging.
Default
disabled; local0
Format
logging syslog
Mode
Global Config
no logging syslog
This command disables syslog logging.
Format
no logging syslog
Mode
Global Config
show logging
This command displays logging.
Format
show logging
Mode
Privileged EXEC
Client Local Port
The port on the collector/relay to which syslog messages are sent.
Historical Logging Administrative Mode
The mode for historical logging.