D-Link DES-3226L, Cli Command Reference

Page: 102 / 128

102 D-Link DES-3226L Command Line Reference
Hypertext Transfer Protocol (HTTP) Commands
This section describes the commands you use to configure Web-based access to the device.
ip http secure-port
This command is used to set the sslt port where port can be 1-65535 and the default is port 443.
Default
443
Format
ip http secure-port <portid>
Mode
Privileged EXEC
no ip http secure-port
This command is used to reset the sslt port to the default value.
Format
no ip http secure-port
Mode
Privileged EXEC
ip http secure-protocol
This command is used to set protocol levels (versions). The protocol level can be set to TLS1, SSL3 or
to both TLS1 and SSL3.
Default
SSL3 and TLS1
Format
ip http secure-protocol [SSL3] [TLS1]
Mode
Privileged EXEC
ip http secure-server
This command is used to enable the secure socket layer for secure HTTP.
Default
disabled
Format
ip http secure-server
Mode
Privileged EXEC
no ip http secure-server
This command is used to disable the secure socket layer for secure HTTP.
Format
no ip http secure-server
Mode
Privileged EXEC
ip http server
This command enables access to the switch through the Web interface. When access is enabled, the user
can login to the switch from the Web interface. When access is disabled, the user cannot login to the
Web server on the switch.
Disabling the Web interface takes effect on all interfaces immediately.