D-Link DES-3226L, Cli Command Reference

Page: 105 / 128

System Maintenance Commands 105
System Maintenance Commands
This section describes the commands you use to view system information, view and configure system
logs, troubleshoot connectivity, and restore various settings to their factory defaults.
The system maintenance commands section includes the following subsections:
z
“System Information and Statistics Commands” on page 105
z
“Logging Commands” on page 114
z
“System Utility Commands” on page 117
z
“Configuration Scripting Commands” on page 120
The commands in this section are in one of four functional groups:
z
Show commands display switch settings, statistics, and other information.
z
Configuration commands configure features and options of the switch. For every configuration
command, there is a show command that displays the configuration setting.
z
Copy commands transfer or save configuration and informational files to and from the switch.
z
Clear commands clear some or all of the settings to factory defaults.
System Information and Statistics Commands
This section describes the commands you use to view information about system features, components,
and configurations.
show arp switch
This command displays connectivity between the switch and other devices. The Address Resolution
Protocol (ARP) cache identifies the MAC addresses of the IP stations communicating with the switch.
Format
show arp switch
Mode
Privileged EXEC
MAC Address
A unicast MAC address for which the switch has forwarding and/or filtering
information. The format is 6 two-digit hexadecimal numbers that are sepa-
rated by colons, for example 01:23:45:67:89:AB
IP Address
The IP address assigned to each interface.
Interface
Valid slot and port number separated by forward slashes.
show eventlog
This command displays the event log, which contains error messages from the system. The event log is
not cleared on a system reset.
Format
show eventlog
Mode
Privileged EXEC
File
The file in which the event originated.
Line
The line number of the event
Task Id
The task ID of the event.