D-Link DES-3226L, Cli Command Reference

Page: 81 / 128

Switching Commands 81
Mode
Privileged EXEC
The following information is repeated for each user priority.
User Priority
The 802.1p user priority value.
Traffic Class
The traffic class internal queue identifier to which the user priority value is
mapped.
show classofservice trust
This command displays the current trust mode setting for a specific interface. The slot/port parameter is
optional and is only valid on platforms that support independent per-port class of service mappings. If
specified, the port trust mode of the interface is displayed. If omitted, the most recent global
configuration settings are displayed.
Format
show classofservice trust [< slot/port >]
Mode
Privileged EXEC
show interfaces cos-queue
This command displays the class-of-service queue configuration for the specified interface. The slot/
port parameter is optional and is only valid on platforms that support independent per-port class of
service mappings. If specified, the class-of-service queue configuration of the interface is displayed. If
omitted, the most recent global configuration settings are displayed.
Format
show interfaces cos-queue [< slot/port >]
Mode
Privileged EXEC
Interface
This displays the slot/port of the interface. If displaying the global configura-
tion, this output line is replaced with a Global Config indication.
Intf Shaping Rate
The maximum transmission bandwidth limit for the interface as a
whole. It is independent of any per-queue maximum bandwidth value(s) in
effect for the interface. This is a configured value.