Concept Pro VXH960-16 User Manual Download Page 94

Page: 94 / 124

Setup

Web Viewer

Motion Recording

Set the <SIZE/FPS/QUALITY/AUDIO> and the <SCHEDULE> to apply if a

motion event occurs.
Click < > next to each item to display the list of values
available.

Complete setting the <SIZE/FPS/QUALITY/AUDIO> for the motion recording

as well as the <SCHEDULE>, and click <APPLY> to apply the changes.

For more information about the motion recording size and

schedule, refer to “Motion Recording”. (page 61)

Alarm Recording

Set the <SIZE/FPS/QUALITY/AUDIO> and the <SCHEDULE> if an alarm

event occurs. Click < > next to each item to display the list of values
available.

Complete setting the <SIZE/FPS/QUALITY/AUDIO> for the alarm recording

as well as the <SCHEDULE>, and click <APPLY > to apply the changes.

For more information about the alarm recording size and schedule, refer

to “Alarm Recording”. (page 61)

Summary of Contents for VXH960-16





























































































































Search results

Summary of Contents for VXH960-16

Reviews:

Related manuals for VXH960-16

Brands by name

Popular brands

Concept Pro VXH960-16, User Manual

Search results

Summary of Contents for VXH960-16

Reviews:

Related manuals for VXH960-16

Brands by name

Popular brands