Concept Pro VXH960-16, User Manual

Page: 33 / 124

30
PTZ Settings
You can confi gure PTZ cameras connected to each channel. Set the camera
ID, protocol, baud rate and PTZ control speed for each channel.
1. From <SYSTEM SETUP> - <CAMERA>, select <PTZ SETUP>.
2. Use [
pqtu
/ENTER] buttons of the remote control or mouse to set
protocol and baud rate of each channel.
R
Refer to user’s manual of the camera or consult the camera installation
service provider for further details on setting the PTZ camera, such as
the camera’s address, protocol and baud rate.
3. To apply your changes, click <APPLY> button.
4. Once the setup is completed, press the [EXIT] button on the remote
control or click the <CLOSE> button to display the confi rmation dialog.
Click <CANCEL> to return to the previous menu.
Privacy mask
Set the privacy mask of the camera so that it can block certain areas of the
camera’s view.
1. From <SYSTEM SETUP> - <CAMERA>, select <PRIVACY MASK>
2. Use the [
pqtu
/ ENTER] buttons on the remote control or the mouse
to activate or de-activate and change the colour of the mask.
3. To apply the changes, click <APPLY> in the bottom of the screen.
4. To set the mask area, click the <AREA SEUP> tab at the top. You can
set 4 areas per camera.
5. Click <AREA 1> and drag where you would like the mask on the
preview. You can do this for each area.
6. Click <ALL VIEW> to see all the privacy masks for that camera.
7. To delete a mask either click <ALL VIEW> or specify an area then
click <DELETE>.
8. To apply the changes, click <APPLY> in th bottom of the screen.
Camera Setting
System
Settings