Concept Pro VXH960-16 User Manual Download Page 71

Page: 71 / 124

Playing back

Playback

Video Window

Displays the current video

Timeline

Displays the type of recording data.

The horizontal bar in the timeline indicates the current point of playback. Double-click a desired point in the timeline to start playing the

video from that point. If you drag to specify an area, you can perform a backup or event search of that area.

Menu/split-screen selection menu

For more information about how to use each button, refer to “Using the status bar in the live mode”. (page 17)

Play Bar

You can start playing, stop playing or change the play speed of the current video.

Playback screen

conﬁ guration

Video

Window

Timeline

Play Time

Menu/split-

screen

selection menu

Play bar

To play the searched data

You can search for and play the recorded data.

To play with the live viewer

Simply double-click a desired time point in the right corner of the play screen.

If you move the cursor to the right most, the “Timeline” bar will be displayed.

Select a desired channel on the live screen and right-click to select <PLAYBACK> in the context menu. Then, select a
desired play time.

Summary of Contents for VXH960-16





























































































































Search results

Summary of Contents for VXH960-16

Reviews:

Related manuals for VXH960-16

Brands by name

Popular brands

Concept Pro VXH960-16, User Manual

Search results

Summary of Contents for VXH960-16

Reviews:

Related manuals for VXH960-16

Brands by name

Popular brands