Concept Pro VXH960-16 User Manual Download Page 100

Page: 100 / 124

Setup

To connect to DVR with VXH264 Pro

Select and run the VXH264 Pro.

Use the Add button to select and add a site to the list.

Please enter a Name.

Provide the IP address, HTTP port number, RTSP port number, and

click <Save>.

Provide the access ID of the DVR as well as the password.

Select whether or not to save the ID and PW.

Press <Save>

Select the site that you added in the DVR List.

Press and hold the connection button to display the pop-up window.

Select <Connect> and try to access.

If connected successfully, you will see the screen as shown.

USING THE VXH264 PRO WITH ANDROID
How to download the Android-dedicated application

From your smart phone, access the Google Play.

Enter “VXH264” in the search bar to fi nd it. Downloading and install the application on your Smart Phone.

Mobile

Viewer

Summary of Contents for VXH960-16





























































































































Search results

Summary of Contents for VXH960-16

Reviews:

Related manuals for VXH960-16

Brands by name

Popular brands

Concept Pro VXH960-16, User Manual

Search results

Summary of Contents for VXH960-16

Reviews:

Related manuals for VXH960-16

Brands by name

Popular brands