Concept Pro VXH960-16 User Manual Download Page 85

Page: 85 / 124

Setup

Web Viewer

Setup Viewer at a Glance

Click <SETUP> to display the remote control screen for the DVR.
When done, click <APPLY > to apply the changes to the remotely connected DVR.

If the VXH960 is in system or record settings then the remote control setup via the web browser will be disabled.

CAMERA
To name the camera title

You can name the camera title that is displayed on each channel screen.
Select a channel to name and provide a new title. Then, click <APPLY > to
apply it.

You can enter up to 9 alphanumeric characters for the

camera title.

Image Setup

You can set the brightness, contrast, tint, and colour of each channel.

When done, click <APPLY> to apply the changes.

The default value is 50.

Summary of Contents for VXH960-16





























































































































Search results

Summary of Contents for VXH960-16

Reviews:

Related manuals for VXH960-16

Brands by name

Popular brands

Concept Pro VXH960-16, User Manual

Search results

Summary of Contents for VXH960-16

Reviews:

Related manuals for VXH960-16

Brands by name

Popular brands