Concept Pro VXH960-16, User Manual

Page: 42 / 124

39
You can set the IP address, DDNS, E-mail settings, and check network
status.
IP Setup
Edit the IP address related properties and remote service port of the DVR.
1. From <SYSTEM SETUP> - <NETWORK>, select <IP SETUP>.
2. Use the [
pqtu
/ENTER] buttons on the remote control or use the
mouse to specify each item of the network settings.
> DHCP: If it is checked, the IP address will be allocated
automatically.
R
For DHCP address allocation, the DVR should be connected to
a network environment such as router that provides DHCP
server service.
3. Deselect DHCP option to enable manual static address confi guration.
> IP ADDRESS: Provide the IP address.
> GATEWAY: Provide the gateway address.
> SUBNET MASK: Provide the subnet mask address.
> 1ST DNS SERVER: Enter the address of the primary DNS server.
> 2ND DNS SERVER: Enter the address of the secondary DNS
server.
> RTSP SERVICE PORT: Port number that the remote client
receives the DVR video from.
> WEB SERVICE PORT: Port number used for connecting to the
DVR with the web browser.
> PORT FORWARDING: If you are using a router, you can set the
port forwarding so that external access to the DVR is allowed.
If the router does not support the uPnP protocol, you must set
the port forwarding manually. For more information, contact your
network administrator.
> DELETE PORT: Release the port forwarding settings for the router.
> MAX TX SPEED: Limit the network transfer rate to access a
remote client.
The video signal may be transferred at a less rate than specifi ed,
which depends on the status of your network connection.
4. To apply the change, click <APPLY> in the bottom of the screen.
5. When done, press the [EXIT] button on the remote control or click
<CLOSE> in the lower screen. The confi rmation message appears and
you will return to the previous menu.
Network Setup
System
Settings